The Harrison Console uses the same protocol as CBServer (XMC) until now we have only supported both Harrison and CBServer when using an X4 expansion hub. However there are some systems using just a SR-6. This does not allow for the simultaneous connection on the console and CBServer.
The latest software allows Port E and F to be used for CBServer and Harrison.
Note1: Port E must be configured as an input
Note2: The interface is controlled by Port F, if communication to port F is terminated then port E will also terminate!
The latest software allows Port E and F to be used for CBServer and Harrison.
Note1: Port E must be configured as an input
Note2: The interface is controlled by Port F, if communication to port F is terminated then port E will also terminate!
No comments:
Post a Comment