Using the UR-422 as a remote to the RM-6 or CBServer(2)

The UR-422 is a small flexible keyboard with user definable keys which may be used to control two RS-422 machines or as a remote directly to the RM-6 or via CBServer(2). Some special commands have been aded to increase the functionality of the UR-422 when used in this mode.

When used as a remote to the RM-6 directly or via CBServer a number of settings have be made as follows

UR-422

Setup/Root/Serial port A(B)/Menu  Position Request Type to 6=XMC

Configure Keyboard as required,

RM-6/SR-4

Setup/Root/Ext/Menu 097 Remote Control of 1= Selected Machine

Setup/Root/Ext/Menu 098 External Machine ID 0=Mast

CBServer

The S9 I/P port must be defined on the S9 I/P window (Access from the popup menu or a macro key)

CBServer2

The Device(Input) port must be defined in the Ports page of the Preferences window

RM-6 and CBServer(2) Commands		CBServer(2) only Commands
Label	Function	Lable
A	Select Port A	CBSrvr A
B	Select Port B	CBSrvr B
C	Select Port C	CBSrvr C
D	Select Port D	CBSrvr D
E	Select Port E	CBSrvr E
Master	Make Current Port Master	CBSrvr F
Chase	Chase Enable Current Port	CBSrvr G
Rec Enable	Record Enable Current Port	CBSrvr H

CBServer(2) Macro Commands

CBServer Macro Commands may be assigned to any CBServer macro in the S9 I/P window (CBServer) or Preferences / Ports window (CBServer2).