It took a few try's to get the system at Twickenham working properly with two 64 track recorders, but after 1 week it seems to be working well. As part of the installation I installed the prototype of our new TFT based remote control panels - see the next blog entry for a full description
If two 64 track recorders becomes normal then it will be necessary to reconfigure the communications between the console and the machines/machine control system. The DFC has 6 sony P2 ports that will support 48 tracks per port but a number of consoles only have one port.
The standard Sony protocol can only control one recorder, here are three possible solutions to track arming multiple machines from a single sony protocol port
1) Implement our xmc protocol, a number of years ago Harrison implemented this which allows them to track arm multiple record machines. The advantages - no modification required to our systems and frame accurate timecode without video syncs, disadvantage - a major change to the console communications s/w.
2) Map the tracks over multiple ports, the maximum possible is 112 which can be mapped over multiple tracks. The advantage - no modification required to the controlling s/w, disadvantage absolute maximum number of tracks is 112, not all serial ports implement the maximum (eg. DFC 48 maximum),.
3) Enhance the Sony protocol to support multiple recorders. The advantage - can support up to 112 tracks per machine, disadvantage - The controlling s/w must be modified to support the new commands. Most of the required commands are present in the RM-6 to support the our multi-machine protocol (xmc) a subset of these can be added to the Sony protocol.
What are we doing about multiple record machines?
1) The next release of the RM-6 will include all the above solutions. Once implemented the commands will be available for any manufacture to use.
2) I am currently updating the serial control system for one mixer manufacture to increase the number of record channels to 96, at the same time I will add the commands to support multiple record machines.
If two 64 track recorders becomes normal then it will be necessary to reconfigure the communications between the console and the machines/machine control system. The DFC has 6 sony P2 ports that will support 48 tracks per port but a number of consoles only have one port.
The standard Sony protocol can only control one recorder, here are three possible solutions to track arming multiple machines from a single sony protocol port
2) Map the tracks over multiple ports, the maximum possible is 112 which can be mapped over multiple tracks. The advantage - no modification required to the controlling s/w, disadvantage absolute maximum number of tracks is 112, not all serial ports implement the maximum (eg. DFC 48 maximum),.
3) Enhance the Sony protocol to support multiple recorders. The advantage - can support up to 112 tracks per machine, disadvantage - The controlling s/w must be modified to support the new commands. Most of the required commands are present in the RM-6 to support the our multi-machine protocol (xmc) a subset of these can be added to the Sony protocol.
What are we doing about multiple record machines?
1) The next release of the RM-6 will include all the above solutions. Once implemented the commands will be available for any manufacture to use.
No comments:
Post a Comment